Alliance Laundry Systems H264I Washer User Manual


 
© Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT
Installation
19
801480
NOTE: Longer inlet hoses are available (as
optional equipment at extra cost) if the hoses
supplied with the washer are not long enough for
the installation. Order hoses as follows:
No. 20617 Inlet Hose (8 feet) (2.44 m)
No. 20618 Inlet Hose (10 feet) (3.05 m)
Figure 15
Water Pressure
Pressure must be a minimum of 20 to a maximum of
120 pounds per square inch (138 to 827 kPa) static
pressure measured at the faucet.
NOTE: Water pressure under 20 pounds per
square inch (138 kPa) will cause an extended fill
time in the washer and may not properly flush out
the detergent dispenser.
Risers
Risers (or air cushions) may have to be installed if the
pipes knock or pound when flow of water stops. The
risers are more efficient when installed as close as
possible to the water supply faucets (refer to Figure 16).
Figure 16
FLW1977N
1 Water Supply Faucets
2 Hot Water Connection
3 Cold Water Connection
4 Water Inlet Hoses
2
1
3
4
WATER
MIXING
VALVE
W005I
1 Risers (Air Cushions)
2 Water Supply Faucets
W005I
2
1