Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
801480
12
Figure 4
Step 3: (Non-Gravity Drain Models Only)
Connect Drain Hose to Drain Receptacle
Remove the drain hose from its shipping position on
the rear of the washer by removing the shipping tape.
IMPORTANT: Drain receptacle must be capable of
handling a minimum of 1-3/8 inch (3.5 cm) outside
diameter drain hose.
Figure 5
FLW1977N
1 Water Supply Faucets
2 Hot Water Connection
3 Cold Water Connection
4 Water Inlet Hoses
2
1
3
4
WATER
MIXING
VALVE
FLW1978N
1 Shipping Tape
1