Filter
Top Products
Page 28
LARGE GEAR REDUCER MAINTENANCE
LARGE GEAR REDUCER MAINTENANCE
Before placing the dryer in operation, check the oil level. If the oil
level is correct, it can be checked by removing the fill overflow
plug on the right hand side of the gear reducer (facing rear).
If oil must be added, remove the pop-off valve at the top of the gear
reducer and add as needed.
CHANGE OIL ONCE EVERY 6 MONTHS.
WARNING:
Oil level shall not exceed 52 oz.
Please drain oil to oil level plug if required.
LARGE GEAR
REDUCER
MAINTENANCE