Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
6
510977
Installation
Dimensions
NOTE: Side, rear and bottom exhaust openings are
4 inch (10.2 cm) ducting. Gas models cannot be
vented out left side of cabinet because of burner
housing.
IMPORTANT: The dryer should have sufficient
clearance around it for needed ventilation and for
the ease of installation and servicing. For maximum
drying performance, we recommend that more
clearance be allowed around the dryer than the
clearances that are listed throughout this manual.
DRY2436N
*With leveling legs turned into base.
DRY2437N
*With leveling legs turned into base.
1 3/8" NPT Gas Connection
DRY2436N
23.5 in.
(59.7 cm)
8.0 in.
(20.3 cm)
28 in.
(71.1 cm)
*42.4 in. (107.7 cm)
Stainless Steel Models
Through Serial No. 1006
*43.2 in. (109.7 cm)
All Other Models
15.4 in.
(39.1 cm)
*Electromechanical Models 39.38 in. (100 cm)
*Electronic Control Models 36.94 in. (93.83 cm)
2.0 in.
(5.1 cm)
ELECTRIC MODELS
*4.0 in. (10.2 cm)
0.4 in.
(1.0 cm)
*4.5 in. (11.4 cm)
*15.44 in.
(39.2 cm)
26.9 in.
(68.3 cm)
DRY2437N
23.5 in.
(59.7 cm)
8.0 in.
(20.3 cm)
2.0 in.
(5.1 cm)
28 in.
(71.1 cm)
15.4 in.
(39.1 cm)
26.9 in.
(68.3 cm)
*2.8 in. (7 cm)
GAS MODELS
0.4 in.
(1.0 cm)
*4.5 in. (11.4 cm)
*4.0 in. (10.2 cm)
2.3 in.
(6 cm)
1
*15.44 in. (39.2 cm)
*Electromechanical Models 39.38 in. (100 cm)
*Electronic Control Models 36.94 in. (93.83 cm)
*42.4 in. (107.7 cm)
Stainless Steel Models
Through Serial No. 1006
*43.2 in. (109.7 cm)
All Other Models