Filter
Top Products
4
504490
Before Drying . . .
Energy Saving Tips
• Make sure the lint filter is always clean.
• Do not overload the dryer.
• Do not overdry items.
• Remove items to be ironed while still damp.
• Large loads of similar fabrics dry the most
efficiently. However, dry permanent press in smaller
loads to prevent wrinkling.
• Use the correct cycle for the type of fabric being
dried.
• Locate your dryer so the exhaust duct is as short and
straight as possible.
• Do not open the door during the drying cycle.
• Plan to do your laundry on low humidity days; your
clothes will dry faster.
• Dry multiple loads of clothes one right after another
so dryer interior does not have to be reheated for
each load.
Helps and Hints
• The necessary suggestions and directions for
installation and proper exhausting are given in
the INSTALLATION INSTRUCTIONS which are
included with the dryer.
• Static electricity may cause garments of synthetic
fibers (as in lingerie) to cling together, especially if
they are overdried. The use of a liquid fabric
softener in the rinse water of the washer, or a fabric
softener sheet in the dryer, will soften clothes and
reduce static electricity.
• Do not wash or dry clothes that shed lint in the same
load with permanent press or knit garments.
• Remove permanent press loads immediately after
dryer stops.
• Follow the care labels on FLAME RETARDANT,
SCOTCH- GUARD™, etc., garments for the proper
washing and drying.
• If loads should be damp for ironing, turn timer knob
to the ENERGY SAVER setting, marked with a dot
(•), in Automatic or Time Dry cycles.
To reduce the risk of fire, explosion, serious
injury or death, clothes which have traces of
any flammable substances such as cooking
oil, machine oil, flammable chemicals,
thinner, etc. must not be put into the dryer.
W131
WARNING