Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
13
70421001 (EN)
LED OPL Control
RE Control Suffix
1. Press the Up ( ) or Down ( ) keypad to change
cycles.
To customize a cycle, refer to the Programming
Manual.
2. Press Start ( ) to start selected cycle.
IMPORTANT: If the loading door or lint panel
door is opened during the cycle, the heating system
will shut off and the motor will stop. To restart the
cycle, both doors must be closed and the
Start ( ) pad must be pressed.
3. When the cycle is complete, open door and
remove laundry.
NOTE: This machine includes an anti-wrinkle/
extended tumble feature. After the drying cycle is
complete, the cylinder will tumble without heat
every few minutes. The intermittent tumbling will
continue for one hour or until the door is opened.
After an hour the machine enters delayed tumble
and will tumble for two minutes every hour for up
to 18 hours or until the door is opened.
Figure 6
PROGRAM REVERSING ENERGY
SAVER
HEATING
STOP
BACK
TMB1371R
START
TMB1345R
PROGRAMREVERSING ENERGY
SA VER
HEA TING
START
STOP
BACK
PROGRAM REVERSING ENERGY
SAVER
HEATING
STOP
START
BACK
TMB1346R
S Models H Models U Models
TMB1345R TMB1346R
TMB1371R