Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
11
70283501
Reversing Operation
Tumblers with the reversing option prevent the
tangling of large pieces of laundry and minimize
wrinkling. These tumblers are equipped with a second
motor and additional controls which reverse the
rotation direction of the cylinder.
Reverse Control Switch
An “on-off” switch for manual timer models, or a
touch pad for OPL Micro models is placed in the
control panel area so the operator can select the
reversing or nonreversing operation. In nonreversing
mode, the cylinder will always turn clockwise (as
viewed from the front of the tumbler). If the cylinder is
turning counterclockwise when switched to
nonreversing, it will continue for a few seconds and
then start up in the proper direction.
IMPORTANT: After any electrical maintenance is
done, make sure that the blower motor is turning
counterclockwise. Then set the reverse control
switch to “nonreversing” and note that the cylinder
turns constantly clockwise as viewed from the front
of the tumbler. If not, interchange L1 and L2
service leads to reverse the drive motor.