Filter
Top Products
If you deactivate the appliance, it is necessary to set the programme again.
AT THE END OF PROGRAMME
1. The appliance stops automatically.
2. The acoustic signals operate, if it is active.
3. In the display
goes on and the message tells you that the programme is completed.
4. The indicator of button
6 goes off.
5. The door lock symbol goes off.
6. Press button
1 to deactivate the appliance. After five minutes from the end of the
programme, the AUTO OFF function automatically deactivates the appliance.
When you activate the appliance again, the display shows the end of the last set pro-
gramme. Turn the programme knob to set a new cycle.
7. Remove the laundry from the appliance. Make sure that the drum is empty.
8. Keep the door ajar, to prevent mildew and odours.
9. Close the water tap.
The washing programme is completed, but there is water in the drum:
– The drum turns regularly to prevent the creases in the laundry.
– The door stays locked.
– You must drain the water to open the door.
To drain the water:
1. If necessary, decrease the spin speed.
2. Touch button
6 . The appliance drains the water and spins.
3. When the programme is completed and the door lock symbol goes off, you can open
the door
4. Press button
1 to deactivate the appliance.
The appliance drain and spin automatically after approximately 18 hours.
HELPFUL HINTS AND TIPS
The laundry load
• Divide the laundry in: white, coloured, synthetics, delicates and wool.
• Obey the washing instructions that are on the laundry care labels.
• Do not wash together white and coloured items.
• Some coloured items can discolour with the first wash. We recommend that you wash
them separately for the first times.
• Button up pillowcases, close zippers, hooks and poppers. Tie up belts.
• Empty the pockets and unfold the items.
22 At the end of programme