Filter
Top Products
10
.
Remove the three bolts. Use the key
supplied with the appliance.
11
.
Pull out the plastic spacers.
12
.
Replace the plastic spacers with the
plastic caps. You can find these caps
in the user manual bag.
WARNING!
Remove all the packaging and
the transit bolts before you in-
stall the appliance.
We recommend that you keep
the packaging and the transit
bolts for when you move the ap-
pliance.
POSITIONING AND LEVELLING
x4
• Install the appliance on a flat hard
floor.
• Make sure that carpets do not stop
the air circulation below the appli-
ance.
• Make sure that the appliance does
not touch the wall or other units
• Loosen or tighten the feet to adjust
the level. A correct adjustment of the
appliance level prevents the vibra-
tion, noise and the movement of the
appliance when in operation.
28