Filter
Top Products
Instructions for use
36
Washing machine vi-
brates during operation
or is unsteady.
Transport safeguard has not
been removed.
Remove transport safeguard
according to setting up and
connection instructions.
The height adjustable
threaded feet are not
correctly adjusted.
Align feet according to
setting up and connection
instructions.
There is very little washing in
the drum (e.g. only a dressing
gown).
Function is not affected by
this.
Water could not be fully
pumped out before spinning
because drainage hose is
kinked or water pump is
blocked.
Move the path of the hose
and, if necessary, remove
kink or clean water pump
and, if necessary, remove
foreign body from pump
housing.
Wash water of the
mainwashing foams
strongly.
Probably too much washing
agent has been filled in.
Dose washing agent exactly
according to manufacturers
instructions.
Water leaks out of the
washing machine.
Connection to the inflow
hose is leaking.
Tighten inflow hose
connection.
Drainage hose is leaking.
Check drainage hose and, if
necessary, replace.
Cover of the water pump is
not properly closed.
Close cover properly.
Washing is jammed
in the door.
Abort programme, remove
washing from door. Start
programme again.
Emergency emptying hose is
not properly closed off or is
leaking.
Close off emergency empty-
ing hose (see section „Carry
out energy emptying opera-
tion“). In the case of a
leaking emergency emptying
hose, call the customer
service.
The emptying pump
runs continuously -
also when the appli-
ance is switched off.
Anti-flood system Aqua Con-
trol has displayed.
Close water tap, remove
electric plug and inform
customer service.
Problem Possible cause Remedy