Filter
Top Products
Instructions for use
20
Change Spin Speed / Select Rinse Hold
0 If necessary, change the spin speed for the final
spin / select RINSE HOLD (GEEN CENTR., SANS
ESSOR.):
Press the button Spin speed/RINSE HOLD (GEEN
CENTR., SANS ESSOR.) as often as necessary until
the display for the required spin speed (or of RINSE
HOLD/GEEN CENTR., SANS ESSOR.) lights up.
If RINSE HOLD (GEEN CENTR., SANS ESSOR.) is
selected, the washing remains in the last rinsing water and is not spun.
3
If you do not change the spin speed, the final spin is automatically
adapted depending on the washing program:
The speed of the intermediate spin depends on the selected program
and cannot be changed.
Set the Delay Timer/Soaking Duration
Delay Timer
The button DELAY TIMER (STARTTIJDKEUZE, DEPART DIFFERE) allows the
start of a washing program to be advanced by 1 to a maximum of
19 hours.
0 To do this, press the button DELAY TIMER
(STARTTIJDKEUZE, DEPART DIFFERE) as often
as necessary until the required start delay is
shown in the multidisplay, e.g.12h in the
form for a program start delay of 12 hours.
If19h is shown and you press again, 0h and
afterwards the run time of the set washing
program appears (display in minutes, e.g.129).
In this state, the delay timer is not set.
– COTTONS/LINEN
(WITTE/BONTE WAS, BLANC/COULEURS)
1600 revolutions
per minute
– EASY-CARES/EASY IRON
(KREUKHERSTELLEND, DEFROISSABLE/
STRIJKVRIJ, SANS REPASSAGE)
900 revolutions
per minute
– DELICATES
(FIJNE WAS, LINGE DELICAT)
700 revolutions
per minute
– WOOLLENS (WOL, LAINE)/P (Handwash) 900 revolutions
per minute
LOOPTIJD
TEMPS
RESTANT
STARTTIJDKEUZE
DEPART DIFFERE