Filter
Top Products
24
Starting the programme
1. Check that the water tap is opened and the drain hose is correctly
connected.
2. Press START PAUSE to start the programme. The corrisponding light
stops flashing and only the pilot light of the running phase wiil stay
on
If the Delay Start option has been selected the programme will start
at the end of the countdown.
If the light END flashes and on the display appears the alarm code
E40
at the start of the programme, it indicates that the door is open. Close
firmly the door and press the START PAUSE button again.
If the delay start option has been selected, the machine starts its
countdown, in hours for the first two hours and then every 30 mi-
nutes, which will appear on the display. During this period it is possi-
ble to load other laundry, or to cancel the delay time.
• Load other laundry: press the START PAUSE button. Open the door.
Load the laundry. Close the door and press the START PAUSE button
again.
• Cancel the delay time: press the START PAUSE button. Press the
DELAY TIMER button until the symbol
0’ appears on the display.
Press the START PAUSE button again if you wish to restart the pro-
gramme.
Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on. After the machine has started,
only the running phase pilot light stays on.
Display
By selecting the wash programme, the display shows
the duration of the selected programme. After having
pressed the START PAUSE button, the time to the end
of the programme decreases minute by minute and it
appears on the display. If the laundry load is smaller
on the display appears the duration of a maximum laundry load.
How to wash
PREWASH
MAIN WASH
RINSE
RINSE
SPIN
END
OVERDOSIN
G
DOOR
2.05
132978470 UK.qxd 21/02/2007 14.33 Pagina 24