Filter
Top Products
Cancelling a programme
To cancel a programme which is running, turn the programme selector
dial to the OFF (RESET) position.
Warning! After cancelling a programme, please check if there is water
left in the drum, otherwise turn the selector dial first to OFF (RESET),
then select the programme DRAIN and the end press the START PAUSE
button.
Altering a programme which is running
To modify the selected programme turn the programme selector dial to
OFF and then choose a new programme.
The water is not emptied out and after pressing the START PAUSE but-
ton again the machine restarts with the newly selected programme.
Altering an option which is running
To alter an option, first set the machine to PAUSE by pressing the START
PAUSE button.
Any option can be modified before the machine starts it. After select-
ing the new option press the START PAUSE button again to re-start the
selected programme.
To modify the selected programme turn the programme selector dial to
O and then choose a new programme.
The water is not emptied out and after pressing the START PAUSE but-
ton again the machine restarts with the newly selected programme.
Opening the door after the programme has started
To open the door set the machine to PAUSE by pressing the START
PAUSE button.
The door can be opened if:
• the machine is not already heating;
• the water level is not above the bottom edge of the door;
The light DOOR on the control panel indicates if the door can be
opened:
• green light: the door can be opened;
• red light: the door cannot be opened;
If you cannot open the door, but you need to open it you have to
switch the machine off by turning the selector dial to OFF. After
about 3 minutes the door can be opened (pay attention to the water
level and temperature!).
16
Description of the appliance
132978470 UK.qxd 21/02/2007 14.33 Pagina 16