AEG 72640 Washer User Manual


 
Select the spin speed or the rinse hold option
Press the Spin button repeatedly to change the spin speed, if you want your
laundry to be spun at a speed different from the one proposed by the washing
machine.
The relevant light will light up.
for cottons and ECO: 1200 rpm.
for synthetics, wool, handwash and delicate
fabrics: 900 rpm.
Rinse Hold : by selecting this option the water of the last rinse is not emptied
out to prevent the fabrics from creasing. When the programme has finished the
display shows a
0 flashing, the pilot lights Door goes on, the Start/Pause light is
off and the door is blocked to indicate that the water must be emptied out.
To empty the water out:
turn the programme selector dial to O
select the Drain or Spin programme
reduce the spin speed if needed, by means of the relevant button
depress Start/Pause button
when the programme has finished the display shows a 0 flashing. the pilot lights
Door goes off and the door can be opened.
Programme option button
Depending on the programme, different functions can be combined. These must
be selected after choosing the desired programme and before depressing the
Start/Pause button.
When these buttons are pressed, the corresponding pilot lights come on. When
they are pressed again, the pilot lights go out.
If an incorrect option is selected, the integrated yellow pilot light of the
Start/Pause button flashes for 3 times and the Err message appears on the
display for some seconds.
Important!
For the compatibility among the washing programmes and the options see
chapter Washing Porgrammes.
13
Use
1200
900
700
500
CENTRIFUG.
132971880 gb.qxd 31/08/2007 12:51 Pagina 13