Filter
Top Products
Run wash cycle
22
Start the washing program, set delay timer
and the final spin speed.
0 Check if the tap is open.
0 Switch on the washing machine: press the (ON/OFF) button.
– The washing program starts automatically after six seconds.
– During these six seconds you can set any delay timer if required to
delay the start of the washing program.
– As soon as the door is locked the On/Off display lamp lights up
(max. 15 seconds after the start).
3
For the programs (STAIN), (MAIN WASH) and
(QUICK WASH) immediately after the program has started
the program selector moves to a position directly behind
(QUICK WASH). Then it displays the program progress as usual.
If applicable set the delay timer (delay of the start of the
program): press the delay timer button so often until the
time delay desired is displayed.
– The remaining time until the start of the programm is dis-
played (in steps of 12, 8, 4, 2 hours).
– While the delay timer expires you can open the door to
add washing.
– Changing or cancelling the delay timer: press the delay
timer button so often until the display lamp of the
desired time delay lights up. If no display lamp lights up,
the delay timer is cancelled, the program will start imme-
diately.
0 If applicable change the spin speed for the final spin or
select Rinse hold:
Press the final spin speed/ (Rinse hold) button
so often until the display of the spin speed required lights
up (or of Rinse Hold).
With (Rinse hold) the washing stays in the final
rinse water, it is not spun.