Cleaning and maintenance
24
Cleaning and maintenance
Cleaning the condenser
1
Important! It is essential to clean the condenser after every thirty
drying processes. Otherwise your dryer might suffer damage.
Furthermore, energy consumption is greater when the condenser is
covered with fluff.
0 Open the fill-in door.
0 Press on the two tabs to unlatch and
take off the base mask.
0 Turn the two securing disks through a
quarter turn each outwards.
0 Pull the condenser out of the base by the
handle.
0 Clean the condenser, best with a hand-
held brush or by rinsing-through
strongly with a hand-held shower head.
The water removal slits on the rear of the
condenser must be free too.
1
Important! Do not use any sharply pointed objects to clean the
condenser. They could make it leak.
0 Reinsert and latch the condenser again (turn each one of the two
securing disks through a quarter turn inwards). The legend "top –
oben – en haut" must be at the top.
0 Re-mount the base mask.
1
Important! The dryer must not be operated without condenser.