Filter
Top Products
Rinse Hold : by selecting this option the water of the last rinse is not emptied
out to prevent the fabrics from creasing. When the programme has finished the
pilot lights (End) goes on, the Start/Pause light and the functioning pilot
light are off and the door is blocked to indicate that the water must be emptied out.
To empty the water out:
turn the programme selector dial to
O
select the (Drain) or (Spin)
reduce the spin speed if needed, by means of the relevant button
depress Start/Pause button
when the programme has finished only the pilot lights (End) comes on.
Programme option button
Depending on the programme, different functions can be combined. These must
be selected after choosing the desired programme and before depressing the
Start/Pause button.
When these buttons are pressed, the corresponding pilot lights come on. When
they are pressed again, the pilot lights go out.
If an incorrect option is selected, an integrated yellow pilot light of the Start/
Pause button flashes for 3 times.
Important!
For the compatibility among the washing programmes and the options see
chapter Washing Porgrammes.
Select the Stain option
To treat heavily soiled or stained laundry with stain
remover (extended main wash with time optimised
stain action phase).
Attention! If you wish to perform a programme
with the stain option, pour stain remover into
compartment .
13
Use
192999930.qxd 6/19/2008 1:35 PM Page 13