Filter
Top Products
15
Setting the delay timer
The (DELAY TIMER) button allows you to delay the start of a
programme.
1.Select a programme.
2.Press the (DELAY TIMER) button once if you would like the wash
programme to begin in 6 hours. The 6h indicator will illuminate. Press
the (DELAY TIMER) button twice if you would like the wash pro-
gramme to begin in 3 hours. The 3h indicator will illuminate.
3 If you press the (DELAY TIMER) button once again the delay timer
setting is cancelled. The indicator goes out.
3.To activate the delay timer, press the (START/PAUSE) button.
Note: If a start delay of 6 hours is selected, the 6h indicator will illumi-
nate. After 3 hours the indicator will change and 3h will illuminate. Af-
ter a total of 6 hours the wash programme will begin.
Starting a programme
1.Check that the tap is turned on.
2.Press the (START/PAUSE) button. The programme starts or will
start after the delay timer has elapsed as set.
During the wash programme the current stage of the programme is
shown in the programme progress display.
3 If after pressing the (START/PAUSE) button the (END) display
flashes 4x, the door has not been closed properly. Push the door firmly
closed and press the (START/PAUSE) button again.
Interrupting a programme/adding washing
Interrupting a programme
• A washing programme can be interrupted at any time by pressing the
(START/PAUSE) button. It is then re-started by pressing the
(START/PAUSE) button again.
• To stop the washing machine before the programme has ended, turn
the programme knob to (OFF). Important! Be careful if there is
water in the appliance!
Adding washing
It is possible to add washing, as long as the (DOOR) light is not lit.
1.Press the (START/PAUSE) button. The door can be opened.
2.Shut door and press the (START/PAUSE) button again. The pro-
gramme continues.