Filter
Top Products
User information
38
Installation
Unpacking
Packing used to protect internal parts of the washing
machine during transport must be removed before the
washing machine is put into service for the first time.
Remove all packing from the washing machine.
Tilt the washing machine sideways and then
remove the packing under the motor, and
straighten the washing machine.
Tilt the washing machine backwards, rotate it
by a quarter of a turn on one of its corner to
remove the transport base.
Open the washing machine lid and remove the
immobilization packing and plastic films.
Close the lid.
Use a 10 mm spanner to remove the two screws
and spacers at the back.