AEG 37320 Clothes Dryer User Manual


 
24
What to do if ...
If the tumble dryer is not working correctly please carry out the follow-
ing checks before calling out an engineer.
Symptom Possible cause Solution
The tumble dryer will not start
The appliance is not
plugged in
Plug in the appliance
The fuse has blown Check the fuse
The START/PAUSEbutton
has not been pressed
Press the START/PAUSE
button
No programme has been
selected
Select the required
programme
The door is not properly
closed
Close the door
The results are unsatisfactory
The wrong programme
has been selected
Select a different
programme
Fluff filter blocked Clean the fluff filter
The tumble dryer has
been overloaded
Observe the maximum
loads stated for each
programme
Laundry not sufficiently
spun prior to tumble
drying
Ensure the wash load is
well spun before tumble
drying
A residue may have
formed on the drum
interior, blocking the
sensors
Clean the inside of the
drum with white vinegar
The drum illumination does
not work
Is the tumble dryer
plugged in
Plug in the tumble dryer
The programme selector
is in the OFF position
Turn the programme
selector dial to LIGHT
The bulb needs replacing Replace bulb
The door cannot be closed
Fluff filter has not been
inserted correctly and/or
the filter lid not closed
Replace the fluff filter
and ensure the filter lid is
closed