Filter
Top Products
62
Cleaning and maintenance
• Put the cap back on the emergency
emptying hose and place the latter back in
its seat.
• Screw the pump cover fully in.
• Close the pump door.
Warning
When the appliance is in use and depending on the programme
selected there can be hot water in the pump circuit. Never remove the
pump cover during a wash cycle, always wait until the appliance has
finished the cycle, and is empty. When replacing the pump cover, after
a cleaning inspection, ensure it is securely retightened so as to stop
leaks and young children being able to remove it.
Cleaning the water inlet filter(s)
If your water is very hard or contains
traces of lime deposit, the water inlet
filter(s) may become clogged.
It is therefore a good idea to clean them
from time to time.
Turn off the water tap(s). Unscrew the
water inlet hose(s). Clean the filter(s) using
a hard bristle brush.
Tighten up the inlet hose(s).
P1117
35.292.805…Lavamat 3085 UK doc. 10/03/2003 12:22 Página 62