AEG 10500 VI Washer User Manual


 
13
To alter or cancel the preset delay, press the START/PAUSE button, then
press the DELAY START button until the required time is displayed or, if
you wish to cancel the delay, until the symbol 0 h is displayed.
Then press the START/PAUSE button again.
When the delay is cancelled, the display shows the duration of the wash
programme previously selected.
Programme Option buttons
Depending on the programme, different functions can be combined.
These must be selected after choosing the desired programme and
before depressing the START/PAUSE button.
When these buttons are pressed, the corresponding pilot lights come on.
When they are pressed again, the pilot lights go out.
If an incorrect option is selected, the pilot lights flash for about 2 seconds
and the message Err is displayed.
SPIN SPEED
Press this button to reduce the maximum speed of the final speed proposed
by the machine for the selected programme.
The maximum spin speed for cotton is 1000 rpm, for easy-cares and
woollens 900 rpm and for delicates 700 rpm.
NO SPIN
When selecting this option, all the spinning phases are cancelled. To be
used for very delicate items.
This function cannot be used for cottons.
PREWASH
The machine performs a prewash cycle at 30°C max. The prewash cycle
ends with a short spin in programmes for Cotton and Easy-cares, and
with emptying of the water without spinning for Delicates.
This option is not available with the wool programme and cannot be
used with STAIN.
For use when washing heavily soiled laundry.
STAIN
To treat heavily soiled or stained laundry with stain remover (extended
main wash with time optimised stain action phase, not selectable for
wool or programmes with temperatures lower than 40°C).
This function cannot be used with QUICK WASH and PREWASH.
Description of the appliance
132996260.qxd 7/24/01 9:12 PM Pagina 13 (Nero/Process Black pellicola)