◆
◆◆
◆ Installation for SLi/CrossFire users
1. Attach the memory heat sinks
1. Attach the memory heat sinks1. Attach the memory heat sinks
1. Attach the memory heat sinks
Remove the previous VGA cooler from your VGA
card.
Attach 8 pcs of memory heat sinks on the RAM
of your VGA card like <picture 6>.
※ The thermal tapes on the memory heat sink
ate not reusable because the adhesiveness will be
reduced after their first attachment.
2. Paste the thermal grease on your GPU (or VPU)
2. Paste the thermal grease on your GPU (or VPU)2. Paste the thermal grease on your GPU (or VPU)
2. Paste the thermal grease on your GPU (or VPU)
Paste the thermal grease on the core your GPU (or
VPU) of your VGA card like <picture 7>.
3. Install the
3. Install the 3. Install the
3. Install the ⑥
⑥⑥
⑥ SLi/CrossFire
SLi/CrossFireSLi/CrossFire
SLi/CrossFire knurling
knurlingknurling
knurling-
--
-nuts
nutsnuts
nuts
Install the ⑥ Sli/CrossFire knurling-nuts on the
VGA cooler like <picture 8>.
※Please check the list of Compatible VGA Cards
& Screws Installation Holes before installing the
screws.
4. Fasten
4. Fasten 4. Fasten
4. Fasten ⑦
⑦⑦
⑦ SLi/CrossFire
SLi/CrossFireSLi/CrossFire
SLi/CrossFire Spring
SpringSpring
Spring-
--
-screws
screwsscrews
screws
Fit the VGA cooler and the installed ⑥
SLi/CrossFire knurling-nuts into the holes on
your VGA card. Fasten ⑦ SLi/CrossFire spring-
screws with a screw driver from the bottom of
your VGA card like <picture 9>.
※Make sure that the base of the VGA cooler and
the GPU (or VPU) are completely in contact with
each other.
※Excessive force may result in malfunction or
damage to the core of your GPU (or VPU).
5. Connect the fan
5. Connect the fan5. Connect the fan
5. Connect the fan-
--
-connector
connectorconnector
connector
Insert your VGA card into the PCI (or AGP) slot
and connect the 3-pin connector to your
motherboard or to your power supply unit like
<picture 10>.
※ Do not connect the 3-pin connector to your
VGA card
<picture 6>
<picture 7>
<Picture 8>
<picture 9>
<picture 10>
Instal lation Guide
Instal lation GuideInstal lation Guide
Instal lation Guide
Please read this installation guide carefully before installation
