A SERVICE OF

logo

ZQ110
Rev. 1.00
- 57 -
Mobile Printer Command Manual
<Function 567> GS ( k pL pH cn fn n (fn=67)
[Format]
[Range]
[Default]
[Description]
[Notes]
ASCII
GS
(
k
pL
pH
cn
fn
n
Hex
1D
28
6B
03
00
35
43
n
Decimal
29
40
107
3
0
53
67
n
(pL + pH x 256) = 3 (pL=3, pH=0)
cn=53
fn=67
0<=n<=2
n=0
Set the mode of .the Aztec barcode module.
n=0 : data mode, n=1 : gs1 mode, n=2 : unicode mode.
In gs1 mode, Extended ASCII characters and control characters are not
suppored.
In gs1 mode, data should start with an AI.
In unicode mode, only latin-1 characters are supported.
The setting of this command affects <Function 580> and <Function 581>
The setting of this command remains effective until Esc @, printer reset
or power cycling is executed.
<Function 580> GS ( k pL pH cn fn m d1…dk (fn=80)
[Format]
[Range]
[Default]
[Description]
[Notes]
ASCII
GS
(
k
pL
pH
cn
fn
m
d1...dk
Hex
1D
28
6B
pL
pH
35
50
30
d1...dk
Decimal
29
40
107
pL
pH
53
80
48
d1...dk
0<=(pL + pH x 256)<=3803 (0<=pL<=256, 0<=pH<=14)
cn=53
fn=80
m=48
0<=d<=255
k = (pL + pH x 256) 3
none
Store Aztec barcode symbol data in the symbol storage area.
The data stored to the symbol storage area by this command is executed
by Function 581. The data remains reserved in the symbol storage area.
Digits only : maximum capacity 3800 digits.
Alphanumeric text : maximum capacity 300 characters.
Byte values : maximum capacity 1900 bytes.