Printer Settings and Adjustments
Card Printer Printing Preferences
P1013372-001 Rev. A Zebra ZXP Series 8 Card Printer with Laminator 73
Card Setup Tab
Card Setup tab allows the user to adjust selected card and print job parameters.
To access the Card Setup Tab, select Start > Printers and Faxes. Right click on the Zebra ZXP
Series 8 Card Printer listing; and select Printing Preferences > Card Setup.
• Card Info allows the user to select the Card Source, Card Destination, and Card Type.
• Printing options allows the user to select the card orientation, to print on both sides of the
card, to rotate the card 180
o
, and to specify the number of copies to print. The Test Print
button prints a test card.
• Ribbon info:
- Ribbon type is the color ribbon installed in the printer. This is not user selectable.
- Ribbon combination allows you to apply color or black, or both, to either side of
the card.
• Laminator options: Top Laminate, Bottom laminate, Laminate side, and Laminate type.
The Image Control button brings up the Image Control window; see next page.
The Restore Defaults button restores Card Setup default values.
- Card type in use allows the user to specify the card type in use. Based on your
selection, the printer automatically adjusts various printer properties for optimum
print quality.
