3 Maintenance
34
1.
Make sure that the machine is
not operating, and open the
front cover of the finisher.
2.
Take the staple cartridge out of
the finisher.
3.
After removing the staple
cartridge, check the inside of
the finisher for any remaining
staples.
4.
Pinch both sides of the empty
staple case with your fingers
(1), and remove the staple
case from the cartridge (2).
5.
Insert the front side of the new
staple case into the staple
cartridge (1), and then push the
rear side into the cartridge (2).
1
1
2
1
2
