DocuMate 510 Scanner User’s Guide 35
Scanning
Selecting New Settings for a Button
For each of the One Touch buttons, you can select a new
Destination Application, Scan Configuration, and Document
Format.
To select new settings for a Scanner Button:
1. Click the button selection arrows to select the button you want
to change.
Each button has its own settings. So, as you click the arrows to
cycle through the buttons, the available settings on the window
change to show them for each button.
2. From the Select Destination list, select the application where
you want documents sent when scanning is finished.
See “Selecting Options for a Button” on page 50 to display a
full list of the Destination Applications that you can use with the
scanner.
3. From the Select Configuration list, select a scan
configuration.
To scan in color, select one of the configurations indicated by
the small color icon, such as the Color Document configuration.
To create your own scan configurations see “Creating a New
Scan Configuration” on page 53.
Select a software application
as the destination to send
scanned documents.
Select a configuration
for scanning.
Select a format for
the scanned image.
Click these arrows to see the
properties for the button
whose settings you want to
change.
NOTE: If you select a word processing program such as
Microsoft WordPad or Microsoft Word and a format that can be
used for OCR (such as TEXT, RTF, or DOC), the text in scanned
images is automatically converted to word processing text.
