Wrangler P5063 Manual

A SERVICE OF

next previous

P5063pr-0923

13

ASSEMBLY

F

• Fit the spacers between the upper holes of the brush guard

and the front end of the vehicle

A

.

• Insert two #8 x 4" screws through the two upper holes in the

brush guard, through the spacers and into the front end of the

vehicle

B

. Tighten the screws.

Spacers

#8 x 4" Screws

16

A

B

Locked

Unlocked

Lock

Fastener

Lock

Fastener

• Using a slotted screwdriver, turn each lock fastener in the hood

1

/4 turn to the locked

position.

IMPORTANT! Remember to keep the lock fasteners locked at

all times to prevent children from accessing the vehicle

battery compartment.

Brush Guard

15

14

• Fit the brush guard to the front end of the vehicle.

Hint: Using the end of a Phillips screwdriver, poke a hole in the

thin plastic covering over the lower holes in the brush guard.

• Insert two #10 x 1" screws through the lower holes in the

brush guard and into the front end of the vehicle. Tighten

the screws.

P5063a-0920