6. Install a 1/4 inch copper water line (not supplied with unit) from
the nearest COLD water pipe. When connecting the water supply,
follow these guidelines:
• Review the local plumbing codes before you install the unit.
• In most instances, the cold water supply will come from the
basement through a hole in the floor.
• The water pressure should be 20-120 psi.
NEVER use an extension cord to connect
power to the unit.
Electrical Grounding Required. This appliance
is equipped with a three prong (grounding)
polarized plug for your protection against pos-
sible shock hazards.
Never remove the round grounding prong from
the plug.
Never use a two-prong grounding adapter.
Where a two-prong wall receptacle is encoun-
tered, contact a qualified electrician to have it
replaced with a three-prong receptacle in accordance with
applicable electrical codes.
