13. OPERATING PROCEDURES
13.9 SELECTING PRINT ITEM
13-15
13.10 DATE CHANGE
The date can be changed temporarily.
Menu: REG., M.DOWN, or REWRAP
Mode: WEIGH, FIX, or BY COUNT
NOTES:
1. A store code can be printed in place of a ‘packed on date’ and ‘sell by date’ by changing the
initial settings #6-5 and #6-6.
To print a store code, select ‘packed on date’ or ‘sell by date’ as a print item using the above
procedure.
2. The print of “packed on time” with alphabetical code can be selected with the Initial setting
#6-6. (SL-9000N only)
3. Setting data will not be changed by turning the power off, changing the mo
PLU.
4. The key has no function.
5. Pressing the key allows you to return to the step of selecting the ‘packed on date’.
6. The range of idle time=0 to 99 seconds. A setting 0 prohibits display of an auto
message.
7. Item 29 is operable only when the initial setting #1-5 is set to ‘0’.
8. Be sure to press the key after the key when changing the label format.
Press:
1
2
NOTE: The scale will check the details of the date input. An invalid date will result in an
1
8
9
4
Enter the new date.
(Ex. Dec. 18, 1994)
Day
Year
Month
DATE 1 2 1 8 9 4
PRT
DT/TM
