A SERVICE OF

logo

4 Replacement Procedures 4.14 ExpressCard slot
4.14 ExpressCard slot
Removing the ExpressCard slot
To remove the ExpressCard slot, follow the steps below and refer to Figure 4-18.
1. Remove the following screws securing the ExpressCard slot.
M2×4C BIND screw ×4
2. Disconnect the ExpressCard FPC from the connector CN2520 on the system board
and remove the ExpressCard slot from the cover assembly.
3. Peel off the insulator.
M2x4C BIND
ExpressCard slot
M2x4C BIND
CN2520
ExpressCard FPC
Insulator
Figure 4-18 Removing the ExpressCard slot
4-34 [CONFIDENTIAL] PORTÉGÉ A600 Maintenance Manual (960-710)