A SERVICE OF

logo

Replacement Procedures
4.15 CPU
Removing the CPU heat sink
The following describes the procedure for removing the CPU heat sink (See Figure 4-27).
1. Disconnect the Heat sink cable from the connector on the system board
2. Remove the following screws securing the heat sink holder along 1 to 6.
M2.5×5.0 BIND screw x8
NOTE: When removing the heat sink holder, be sure to remove the screws in the reverse
order of the number marked on the holder.
3. Remove the CPU heat sink.
Figure 4-25 Remove the CPU heat sink
Satellite P300 and Satellite Pro P300 Maintenance Manual (960-Q08)
51