18
(1. 3. 4) Changing each setting in PW SR mode
-- SHUTTER --
MODE E.TRG
E.TRG PW SR
TRG.P
PART OFF
<MODE = E.TRG E.TRG = PW SR>
• Partial scanning switch
OFF/30fps/40fps/E.30fps/E.40fps
Input trigger pulse : positive polarity
Input trigger pulse : negative polarity
1P SNR, 1P SR, PW SNR, PW SR
• Input trigger pulse setting at PW SNR and PW SR
• Sutter mode MANU, SS, E.TRG
• E.TRG mode
Move up down
By pushing
MENU UP, DOWN
Set by pushing
DATA UP, DOWN
(a) Changing the polarity of inputting trigger pulse setting
1
Set the "→" to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.
2
Select either
, by pushing [DATA UP], [DATA DOWN] buttons.
Note:
The longer the storage time with extended exposures, the more visible certain characteristics of CCD
cameras become: fixed pattern noise, white pixels, etc.
