22
PROCESS( 4 )
• Gamma Correction (GAMMA)
Select either OFF or ON of Gamma Correction.
• Master Pedestal (M. PED)
Adjust the Pedestal level of each RGB.
• R Pedestal (R. PED)
Adjust the Pedestal level of Red.
• B Pedestal (B. PED)
Adjust the Pedestal level of Blue.
• Noise Reduction
Select either OFF or ON of Noise Reduction.
• R pedestal adjustment -64 to 64
• Master pedestal adjustment -64 to 64
• Gamma correction ON/OFF
• B pedestal adjustment -64 to 64
M.PED 0
OFF
R.PED 0
0
B.PED
GAMMA
PROCESS
• Noise reduction ON/OFF
OFF
NR
by pushing
MENU UP, DOWN
value by pushing
DATA UP, DOWN
Changing gamma correction(4. 1)
Move the “
” to GAMMA by pushing [MENU UP], [MENU DOWN] buttons.
Select the gamma correction by pushing [DATA UP], [DATA DOWN] buttons.
Changing master pedestal(4. 2)
Move the “
” to M. PED by pushing [MENU UP], [MENU DOWN] buttons.
Adjust the master pedestal by pushing [DATA UP], [DATA DOWN] buttons.
Changing R pedestal(4. 3)
Move the “
” to R. PED by pushing [MENU UP], [MENU DOWN] buttons.
Adjust the R pedestal by pushing [DATA UP], [DATA DOWN] buttons.
Changing B pedestal(4. 4)
Move the “
” to B. PED by pushing [MENU UP], [MENU DOWN] buttons.
Adjust the B pedestal by pushing [DATA UP], [DATA DOWN] buttons.
Changing noise reduction(4. 5)
Move the “
” to NR by pushing [MENU UP], [MENU DOWN] buttons.
Select the noise reduction by pushing [DATA UP], [DATA DOWN] buttons.
120730c1_IK_TF7P2_EN.indd 22 12.7.30 1:19:02 PM
