Toshiba IK-WB11A Manual

next previous

AMERA

ONFIGURATION

These cameras integrate with the OneHome software using their factory default settings. If the camera

has had any configuration changes then reset it to factory defaults before continuing.

1. Follow the Toshiba instructions to connect the camera to the network and determine the camera’s

IP address.

2. Browse to the camera and login as the administrator. Click on Network Settings and set the IP

address to be a static IP for integration with the OneHome software. We recommend setting the

first camera to 192.168.0.80, the second to 192.168.0.81 and so on. See settings below.

3. Click on Security Settings and set user restrictions to off as shown below.

4. Do not change the login username or password from the Toshiba defaults or the OneHome

system will not have access to the camera. Defaults for this camera are Username: root and

Password: ikwb.