- 8 -
q DC IN 12V terminal Accepts a DC power unit (12 V).
w VIDEO terminal Outputs VBS signal. Connected to monitor, recording device,
etc. (BNC connector)
e RS232C terminal Used to control functions by communications via RS232C.
r DISP button Used when switching the display.
t PAGE button Used when switching to the setting screen and when selecting
the setting screens.
y MENU UP button Selecting the function to be confirmed or changed on the setting
screen.
u MENU DOWN button Selecting the function to be confirmed or changed on the setting
screen.
i DATA UP (AWB) button Changes the setup contents of the function selected by the
MENU (UP/DOWN) button.
(Also used to perform ONE PUSH WB.)
o DATA DOWN button Changes the setup contents of the function selected by the
MENU (UP/DOWN) button.
!0 S-VIDEO terminal Outputs Y (brightness signal) and C (color signal).
!1 Camera Support Fitting Fitting to fix the camera to the housing.
!2 IRIS terminal (4P) Connected when using automatic iris lens.
!3 Image sensor Equipped with imaging element. Carefully prevent dust, dirt,
fingerprint, etc.
• Because the surface is coated, use a soft cloth when wiping. Using abrasives may
strip the coating.
Cautions
