2 INSTALLING CLIENT SOFTWARE
18 Installing Network Fax Software
Installing Network Fax Software
This chapter describes how to install the software required for fax transmission from this equip-
ment and for using various address books. It is recommended that you read this chapter in its
entirety before the installation.
Overview
Before you can begin utilizing the network fax feature for this equipment, you must install the
software using the Client Utilities CD-ROM provided. You will use the InstallShield client soft-
ware setup process.This section describes the way to add Network Fax Driver and Address
Book Viewer to user’s workstations.
System requirements
The Network Fax Driver and Address Book Viewer are available for the following environments:
y Display resolution
1024 x 768 dots or more
y Display color
High Color (16bit) or higher is recommended
y CPU
Pentium 133 MHz minimum (Pentium 266 MHz or faster recommended)
y Memory
64MB for Windows 98
96MB for Windows Me and Windows NT 4.0
128MB for Windows 2000/XP/Server 2003
y OS
Windows 98 (Windows 98 Second Edition Recommended)
Windows Me
Windows NT 4.0 Service Pack 6a
Windows 2000 Service Pack 4
Windows XP Service Pack 1
Windows Server 2003
Before installing client software
Before installing the client software, confirm the following to perform an appropriate installation.
— Checking if the Address Book Viewer has been installed
If the Address Book Viewer has bee installed from either the Client Utilities CD-ROM or Client
CD-ROM for e-STUDIO3510c Series, e-STUDIO451c Series, e-STUDIO850 Series, e-
STUDIO452 Series, e-STUDIO282 Series, e-STUDIO4511 Series, e-STUDIO450 Series, or e-
STUDIO280 Series, you do not have to install it again. The Address Book Viewer can be used
commonly.
If you want to install Network Fax Driver and Address Book Viewer from this CD-ROM, uninstall
the existing Network Fax Driver and Address Book Viewer then reinstall it using this Client Utili-
ties CD-ROM. When you uninstall the Address Book Viewer, please click [No] at the dialog box
that displays the message to delete the settings for the Address Book Viewer so that you can
restore the settings after installing the new Viewer.
