28 © Titan Tool Inc. All rights reserved.
Line Pointer (P/N 424-620)
1
3
4
2
1
Item Part # Description Quantity
1 424-244 Clamping bolt........................................2
2 424-257 Clamp ...................................................1
Item
Part # Description Quantity
3 424-258 Guide....................................................1
4 424-268 Cap.......................................................1
Trigger Assembly
Item Part # Description Quantity
1 424-219 Mounting block .....................................1
2 856-744 Screw....................................................1
3 424-203 Trigger ..................................................1
4 424-218 Flanged bearing ...................................2
5 759-034 Pin ........................................................1
6 424-229 Grease fitting........................................1
7 759-015 Clevis pin..............................................1
8 424-217 Lever plate............................................1
9 759-033 Knob .....................................................1
10 424-227 Spool ....................................................1
1
3
4
2
5
8
9
10
7
4
8
6
Trigger Selection
The handlebar on the right triggers the gun or guns. The
selector on the trigger must be set for the first gun, both guns, or
the second gun .
First Gun
The first gun position is with the
selector in the left position. Push
the lever toward the inside of the
frame until the pin engages the left
plate.
Dual Guns
The dual gun position is with the
selector in the center position.
Push the lever toward the center
position until the pin engages both
plates. The pin must engage both
plates.
Second Gun
The second gun position is with
the selector in the right position.
Push the lever away from the
inside of the frame until the pin
engages the right plate.
