Teledyne API – Technical Manual - Model 300E Family CO Analyzers Introduction
25
1.2.1. USING THIS MANUAL
NOTE
This manual explains the operation and use of both the M300E and the M300EM Gas Filter Correlation
Carbon Monoxide Analyzer.
For the most part these two instruments are nearly identical in their features and functions.
The examples and illustrations shown in this manual represent the M300E. Where a significant difference
does exist between the different models, each version is shown.
NOTE
Throughout this manual, words printed in capital, bold letters, such as SETUP or ENTR represent
messages as they appear on the analyzer’s display.
This manual has the following structure:
TABLE OF CONTENTS:
Outlines the contents of the manual in the order the information are presented. This is a good overview of the
topics covered in the manual. There is also a list of appendices, figures and tables.
PART I – GENERAL INFORMATION
INTRODUCTION
A brief description of the M300E/EM Analyzer architecture as well as a description of the layout of the
manual and what information is located in its various sections.
SPECIFICATIONS AND WARRANTY
Lists the performance specifications of the analyzers . If applicable, a description of the conditions and
configuration under which EPA equivalency was approved as well as the Teledyne API’s warranty
statement.
GETTING STARTED
This section provides instructions for setting up, installing and running your analyzer for the first time.
GLOSSARY
Answers to the most frequently asked questions about operating the analyzer and a glossary of acronyms
and technical terms.
OPTIONAL HARDWARE & SOFTWARE
The section describes the optional equipment and their functions for your analyzer.
