Teledyne API Ultrafine Particle Monitor - Model 651 Maintenance, Service, and Troubleshooting
07506C DCN6727 87
Status Messages
Status messages display at the top of the Home screen. The
messages are described below.
Status Message Indicator Description
Low Water
Water level is low
Warmup
Instrument is warming up
Laser Fault
Laser malfunction
Inlet Pressure Fault
Inlet pressure is too high/low
Vacuum Fault
Vacuum pressure is too high/low
Nozzle Fault
Flow obstruction exists
Absolute Pressure
Fault
Barometric pressure is outside the operating
range
Optics Temp Fault
Optics temperature is out of range
Growth Tube Temp
Fault
Growth Tube temperature is out of range
Conditioner Temp
Fault
Conditioner temperature is out of range
Separator Temp Fault
Separator temperature is out of range
Pulse Height Fault
Low pulse height
Ready
Warm-up process has finished and the Model 651
is ready for use.
Fault
Unspecified fault (not covered by any of the
specific indicators)
Note: The messages are a warning that there is a problem with the
instrument, but only one message can display at a time. Check
the Status screen for more details about potential problems.
