Chapter 4: BIOS
4-19
Lane Reversal
Use this setting to Enable or Disable Lane Reversal.
Hot Plug Support
Use this setting to set Hot Plug Support. Options include Disabled and
Native.
NB-SB Port Features
NB-SB Link APSM
Use this to set the NB-SB Link ABSM. Options include L1 and Disabled.
Link Width
This setting allows you to set the Link Width for the NB-SB port. Options
include Auto, x1, x2 and x4.
NP NB-SB VC1 Traffi c Support
Use this setting to Disable or Enable NP NB-SB VC1 traffi c support.
Compliance Mode
Use this setting to Enable or Disable Compliance Mode for the NB-SB
port.
GPP1 ~ GPP3b Core Settings
These submenus allow you to specify GPP core settings. Each submenu
allows you to defi ne the same settings listed below.
Core Confi guration
This setting allows you to confi gure core confi guration. Options include
Auto, 1x16 and 2x8.
Powerdown Unused Lanes
This setting allows you to Enable or Disable the powerdown of unused
lanes.
Turnoff Off PLL During L1/L23
This setting allows you to Enable or Disable turning off PLL during L1/
L23.
