Planning Information
36" (914) Framed Electric Cooktop
MODEL CT36E
Dimensions in parentheses are in
millimeters unless otherwise specified.
6
Installation specifications for a 36" (914) framed electric cooktop installed above a 36" (914) built-in oven.
INSTALLATION OF 36" ELECTRIC
COOKTOP ABOVE A BUILT-IN OVEN
A Wolf 36" (914) framed electric cooktop may be
installed above the Wolf 36" (914) built-in single
oven. Refer to the illustration below for specifi-
cations for this installation.
IMPORTANT NOTE: When a oven is installed
below the cooktop, unless you are using
cabinets deeper than 24" (610), it is recom-
mended that the electrical supply for the oven
and the electrical supply for the cooktop be
located in the adjacent right side cabinet. A 2"
(51) diameter hole to route the conduit through
cabinetry will be required.
IMPORTANT NOTE: Wolf electric cooktops are
designed and agency approved for installation
with Wolf built-in ovens only.
Wolf recommends using 39" (991) wide cabinets
for this installation. A minimum 24" (610) of
usable cabinet depth is required. The cabinet
base must be able to support 250 lbs (113 kg).
It is recommended that the rough opening for
the oven be 7
3
/4" (197) from the floor to ease
use of the oven door.
A Wolf 36" (914) framed electric cooktop may
also be installed above the Wolf 30" (762) single
oven.
For electrical requirements and additional
specifications for the built-in oven, refer to the
Built-In Ovens section of our website,
wolfappliance.com.
