POPULAR OPTIONS
Welded stainless steel collection basin – for extra protection, all collection basin parts
exposed to the circulating water, including structural members projecting into the basin
(plus attaching hardware and all basin options) are heavy-gauge series 300 stainless steel.
Electric basin heater – incorporating a stainless steel electric immersion heater with
magnetic contactor and solid state circuit board can prevent freezing during operation
in cold weather. A pump heat trace comes standard with the basin heater package.
Solid state water level control package – monitors basin water level with solenoid-valve
water makeup. Configurations include makeup along with high and low water level alarm
and cutoff and electric basin heater cutoff.
Positive closure dampers – gives the added security of safe operation in freezing weather by
trapping heat inside the fluid cooler while fans are inoperable. Electric or pneumatic actuator
operation allow for flexibility during design.
Vibration switch – protects against mechanical failure should the tower experience high
vibration levels. Automatically shuts down the motor. Manual reset ensures inspection
to correct initial vibration cause.
Variable speed drive – provides the ultimate in temperature control, energy management,
sound control and mechanical equipment longevity.
Control systems – range in sophistication from standard fan and pump starters to
Programmable Logic Controllers that work in conjunction with your building or process system.
Sound attenuation – baffles can be installed across the length of the air inlet, as well as the
air outlet opening. All baffles are constructed of perforated sheet metal and contained within a
self-supporting steel box.
For fully-rated thermal
performance, low sound levels
and installation costs, year-round
operating reliability and simplified
maintenance requirements,
demand the Marley MC Fluid
Cooler. Call 44 0 1905 720 200
or visit www.spxcooling.com
to learn more.
Standard HDG coil pressure tested to 2757 kPa
Hot dipped galvanized after fabrication
Welded process fluid connection on either side
Coils sloped for drainage
