/ The Aquatower Advantage /
■ Proven Performance. CTI Certified. Plus SPX stands by
its responsibility for reliable thermal performance. We
designed it. We rate it. We guarantee it!
■ Induced-Draft Design. Save on fan power. The fan will
operate in a warm atmosphere even in winter, so you’ll
never have to work on frozen mechanical equipment.
■ Crossow Design. Save on pump power because you
only pay to move the water to the top of the tower. Gravity
does the rest. The mechanical equipment and water
distribution system are out where you can easily maintain
them.
■ All-Season Reliability. Aquatowers perform as specified
in the heat of summer. They respond well to energy
management techniques in the spring and fall and
with appropriate fan controls, they can operate virtually
ice-free in the dead of winter. Plus they offer simple
maintenance all year long.
■ Proven Corrosion Protection. Thousands of users
over more than 40 years confirm the value of heavy
galvanizing. And Marley’s Z-600 is the most effective
galvanizing used in the industry.
■ PVC Film Fill with Integral Drift Eliminators and
Louvers. If you’ve ever had to replace deteriorated
eliminators or louvers, you’ll appreciate this advantage.
Now those components are molded right in the PVC fill
sheets. Integral honeycomb louvers keep the circulating
water inside your tower—and off your roof!
■ Select Your Aquatower on Our Website. The Marley
UPDATE web-based selection software—available at
www.spxcooling.com—provides Aquatower model
recommendations based on your specific design
requirements
■ Simple, Flexible Installation. Just mount the motor, belts
and belt guard, install the outlet connection that suits
your needs—both side suction and bottom outlet are
provided, complete with screens—and adjust the float
valve. Attach air-inlet screens on models 494A and larger
and your Aquatower is ready for operation.
