A SERVICE OF

logo

17
06/05 ID# M855441
17.
After pole has been secured to plate (2) loosen nut (25),
r
emove cotter pin (37), and pull out pin (36). This will
allow the removal of the assembly bolt (14) which is no
longer necessary for the remainder of the assembly and
installation of system.
WARNING: ONLY AFTER NUTS (25)
HAVE BEEN FULLY TIGHTENED:
Remove cotter pin (37) and pin (36)
to remove assembly bolt (14) from
bottom plate (2).
35
37
36
24
25
14
25