17
Connections
Connecting a TV, VCR, and Satellite Receiver using Component Video
(Y, PB, PR)
1 Connect the coaxial cable from your satellite antenna to SATELLITE IN on the satellite
receiver.
2 Connect the coaxial cable from your cable service or antenna to the IN jack on your VCR.
3 Using a coaxial cables (not supplied), connect the OUT jack on your VCR to the
VHF/UHF jack on your TV.
4 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite
receiver to AUDIO/VIDEO IN on your VCR.
5 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
6 Using component video cables (not supplied), connect Y, PB, PR OUT on your satellite
receiver to Y, P
B, PR IN on your TV.
7 Connect AUDIO OUT on your satellite receiver to AUDIO IN on your TV.
Using your TV with this connection
❏
Program your Sony remote control to operate your VCR or satellite receiver (
see page 5
).
❏ Turn on your VCR to enable your satellite receiver to work with this connection.
❏ To activate your remote, press (FUNCTION button) to operate your VCR or
(FUNCTION button) to operate your satellite receiver.
❏ Press repeatedly to switch between VCR input (VIDEO input), VHF/UHF
(local channels or unscrambled), or your cable box (cable system or scrambled channels).
1
3
4
VIDEO
L L
(MONO)
R
S VIDEO
Y
PB
PR
5
VIDEO 1
VIDEO 2
L
R
L
R
Y
B
P
P
R
VIDEO 1
VIDEO 2
VIDEO
LINE
IN
LINE
OUT
AUDIO L AUDIO P
AUDIO OUT
(VAR/FIX)
L
R
(MONO)
4
2
From
cable/
antenna
VCR
Rear of TV
3
5
7
6
1
Video (yellow)
Audio L (white)
Audio R (red)
Audio L
Audio R
Satellite
Receiver
P
R
(red)
P
B
(blue)
Y (green)
(red)
(white)
