51
Watching the TV
2 Press V/v to select (Audio), then press .
3 Press V/v to select “Center Speaker Mode” then
press
.
4 Press V/v to select the video input (Video 1-5)
you want to use the TV’s speakers as the center
speaker, then press
.
5 Press V/v to select “On,” then press .
6 Press MENU to exit the menu screen.
To return to the normal speaker mode
Select “Off” in step 5 above.
Note
When “Center Speaker Mode” is set to “On,” “Treble,” “Bass,”
“Balance,” “Steady Sound,” “Effect,” “MTS,” “Speaker,” and
“Audio Out” cannot be selected.
,
,
,
,
Listening to the center speaker
sound from the TV’s speakers
1 Press the Input Select buttons (VIDEO 1/2/3,
VIDEO 4 or VIDEO 5) to select the video input
selecting “Center Speaker Mode.”
2 Press VOL +/– to adjust the volume of the center
speaker sound from the TV’s speakers.
Note
If nothing is connected to the TV’s CENTER SPEAKER IN
terminals or if the sound source emitted from the amplifier does
not contain the center speaker channel, no sound is heard from
the TV’s speakers.
Tip
When you want to fine tune the volume of the center speaker
sound from the TV’s speaker according to the input source
(Video input 1,2,3,4 and 5) and your preference, follow the
above steps.
TV
VIDEO 1/2/3VIDEO 4 VIDEO 5
F1
F2
RESET MTS/SAP
GUIDE
TV/SAT
FREEZE
1
2
TV
VIDEO 1/2/3VIDEO 4 VIDEO 5
