GB
40
Photography with wireless flash
1 Attach the flash unit to the camera and turn the power
of the flash unit and camera on.
2 Set the camera to wireless flash.
• The setting method differs depending on the camera used. For details, refer
to the operating instructions of your camera.
• When the camera is set to wireless, the flash unit is also set to wireless
automatically, then one of the wireless flash lamps, either [ WL CH1] or
[ WL CH2] on the display panel is lit.
• [ WL CH1] is lit when channel 1 is selected in the wireless channel
setting of the flash unit, [ WL CH2] is lit when channel 2 is selected. For
details on changing the channel settings, see page 44.
• The light level can be changed even for the wireless flash mode. For details,
refer to page 44.
