Display protection settings
Menu item Function
POWER SAVE
Sets how long the interactive flat panel waits to go into Power Save
mode after a lost signal.
N OTE
When you connect a DVI video cable, the video card might not stop
sending digital data even if there is no image. In this case the
interactive flat panel doesn’t enter Power Save mode.
STANDBY MODE
Lowers power consumption.
N OTE
You can’t use RS-232C and LAN Functions in Eco Standby mode.
HEAT STATUS Displays the FAN, BRIGHTNESS and TEMPERATURE settings.
FAN CONTROL Sets the cooling fan to protect the interactive flat panel from
overheating. When it’s selected, you can adjust the starting
temperature of the cooling fan and its speed.
SCREEN SAVER Sets a screen saver to reduce the risk of apersistent image.
SIDE BORDER COLOR Adjusts the color of the borders that appear when a 4:3 image is
displayed.
AUTO BRIGHTNESS
Adjusts the brightness level according to the input signal.
N OTE
You can’t select this function when the picture mode is set to
AMBIENT1 or AMBIENT2.
CHANGE SECURITY
PASSWORD
Enables you to change the security password. The preset password is
0000.
SECURITY LOCK Locks the security password.
DDC CI ENABLE/DISABLE: turns on or off the two-way communication and
control of the interactive flat panel.
DISPLAY PROTECTION
RESET
Restores the Display Protection settings to their default values.
A PPEN DI X A
Adjustingvideosettingswiththeon-screendisplaymenu
80
