UX5000U-SFTI
TIMER OPERATIONS
The Timer function allows you to set an operation to be performed automatically at a
time you specify. Up to 48 operations can be set at any one time, and the time of each
can be set up to a week in advance.
You can use this function to take advantage of lower nighttime rates without having to
be there when the operation is performed.
Note:
The
DOCUMENT
key cannot be used for a timer transmission.
Initial procedure
To set a timer operation, first perform the following procedure. After you have
completed it, go to the procedure for the specific operation you want to set (see the
following pages).
♦ Code numbers are used to specify days of the week. Refer to the table below when
making time settings which include a specified day:
Day SUN MON TUE WED THU FRI SAT
Code 0123456
Step Press these keys: Comments
1
TIMER MODE will appear in the display.
2
Select SET.
3
Press the appropriate key one or more times as
shown below to select the type of operation.
• Transmission
• Confidential transmission
• Polling
• Serial Polling
• Broadcasting
• Relay Request
4
T
TIMER
1
START
SPECIAL FUNCTIONS 4-17
